Titanium carbide




product details


(1) Product features: titanium carbide is known as the hardest carbide, is an important raw material for the production of cemented carbide. Tic also has the characteristics of high thermal hardness, small friction coefficient and low thermal conductivity, so the tool containing TIC has higher cutting speed and longer service life than WC and other materials. If a thin layer of tic is deposited on the tool surface of other materials (such as WC), the performance of the tool can be greatly improved.


(2) Product application: mainly including titanium carbide used in welding material industry, titanium carbide used in plasma spraying industry, silicon nitride, sintering aids in special ceramic products, etc. our company has established a long-term stable supply relationship with domestic well-known enterprises.


Common granularity:


A. common specifications of powder metallurgy and cemented carbide addition industry: 200 mesh, 300 mesh, FSSS 2.6-3.2 μ m or as required.


B plasma spraying laser cladding, 3D printing, common particle size specification: 75-45 μ m 53-15 μ m 45-15 μ m flow rate: 16g / 50s


C welding material, alloy addition, common specification: 80-200 mesh, or production according to customer requirements.


(4) Chemical composition and physical index (as shown below)


(5) Product executive standard:

Chemical composition of the product
Purity	Main ingredients		Impurity content（%）
TiC	Ti	总碳	游离碳	Fe	Si	Al	O	N	total impurities
99.5%	余量	>19.5%	<0.15%	0.1	0.05%	0.01%	0.35%	0.05%	不大于0.5%
1. Common specifications of powder metallurgy and cemented carbide addition industry: 200 mesh, 300 mesh, FSSS 2.6-3.2 μ m or as required 2. Plasma spraying laser cladding, 3D printing, common particle size specification: 75-45 μ m 53-15 μ m 45-15 μ m flow speed: 16g / 50s 3. Welding material, alloy addition, common specification: 80-200 mesh, or production according to customer requirements.